Vous avez une question ou voulez-vous commander ce produit ? N’hésitez pas à nous contacter.
Vous avez une question ou voulez-vous commander ce produit ? N’hésitez pas à nous contacter.
Filter de producten en categorieën door alleen bepaalde partners te tonen.
The Model 3007 Series of neutron dose survey meters combines a handheld digital meter with a 19.5 cm (7.7 in.) diameter REM ball containing a 3He detector to measure and monitor neutron radiation. Several versions of these instruments are available. The Model 3007 and Model 3007B use similar detectors that only differ by the boron concentration in the internal borated layer. The Model 3007 has a lower boron concentration and offers a typical sensitivity of 10 cpm per μSv/h (100 cpm per mrem/hr), but tends to overrespond in the 5 keV range. The Model 3007B has a higher boron concentration and a lower sensitivity, typically 4.5 cpm per μSv/h (45 cpm per mrem/hr), but does not have the same overresponse issue. The Model 3007-1 has a higher pressure detector that offers greater sensitivity, typically 17 cpm per µSv/h (170 cpm per mrem/hr), but falls under shipping regulations due to the pressure. “i” versions include an internal gamma detector in the meter for exposure or dose measurements.
Each instrument features a large, easy-to-read LCD screen and is controlled using a simple five-button interface. The meter body is made of high-impact plastic, and splash resistant construction allows the instruments to be used outdoors.
Four modes of operation are available – RATE, MAX, COUNT, and DOSE – which can be selected by pressing the MODE button. Measurements can be collected in two sets of units (primary and secondary) for RATE and MAX modes in cps, cpm, Bq, dpm, mR/hr, mrem/hr, or μSv/h units. The user can switch between two sets of units by pressing the UNITS button. Audible alarms can be set in all modes of operation. When enabled with the optional Lumic Data Logger Kit, data can be logged in any of the operational modes using the LOG button on the handle. Up to 1000 data points can be stored internally.
Instrument setup can be done either through the front-panel controls or via the Lumic Calibration Kit. The Model 3007 is shipped ready to use with batteries and a calibration certificate.
Il y a un téléchargement disponible pour ce produit.
Entrez votre adresse e-mail pour avoir accès à tous les téléchargements PEO.
Choisissez vos préférences en matière de cookies. Pour offrir les meilleures expériences, nous utilisons des cookies, entre autres, pour stocker et/ou accéder aux informations sur l'appareil. En consentant à ces cookies, nous pouvons traiter certaines données sur ce site. Si vous ne donnez pas votre autorisation, cela peut avoir un effet négatif sur l'opération.