Heeft u een vraag of wilt u dit product bestellen? Neem dan contact met ons op.
A family of small and light CZT-based Gamma detector spectrometers!
The Kromek GR family is a range of CZT-based high-performance Gamma spectrometers. They are completely self-contained, with built-in preamplifier, shaping amplifier, baseline restorer, pulse height digitizer and HV supply. The digitised pulse heights of detected Gamma signals are sent to a computer via the USB. The unit is powered entirely from the USB bus, so no external power supply is needed.
Can be used for all Gamma radiation detection needs either straight out of the box or built into your own devices. The GR Gamma detectors can be mounted side by side in an array to give you coverage of a large area.
GR1/GR1+ Gamma spectrometer
- Perfect for most uses
- Energy resolution: < 2.5% FWHM @ 662 KeV
- USB output only
- 1 cm cubed CZT detector
- The plus model is available for those that need higher resolution:
- Energy resolution: <2.0% FWHM @ 662 KeV
GR1-A/GR1-A+ Gamma spectrometer
- For those that need extra outputs channels
- Energy resolution: < 2.5% FWHM @ 662 keV
- USB output
- Three MCX connectors that provide energy and timing outputs and gate inputs
- MultiSpect Analysis spectroscopy software included in the price
- 1 cm cubed CZT detector
- The plus model is available for those that need higher resolution:
- Energy resolution: <2.0% FWHM @ 662 KeV
GR05 Gamma spectrometer
- For use in a high-flux environment
- Energy resolution: < 2.5% FWHM @ 662 keV
- Max dose rate approximately 10mSv/hr
- USB output
- Smaller 0.125 cm cubed CZT detector
- For use in high-count (high-flux) environments
PDF en beschikbare downloads
U kunt de informatie op deze pagina en de beschikbare downloads downloaden als één PDF-bestand. Voor dit product is één download beschikbaar.
Vul eenmalig uw e-mailadres in om toegang te krijgen tot alle downloads op de website van PEO.
Voor dit product is één download beschikbaar.
GR Series_PEO.pdf
